Formulated specifically for FRP and cultured marble industries where a flange or edge wax is required to assist in the prompt and easy release of the part.

• Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.

DIRECTIONS

• Apply 3 consecutive coats of #68 Edge Wax.
• Allow each coat to dry before applying the next one.  
• Apply 2nd and 3rd coats to all flanges, corners, edges and areas where a gloss is not required.

This builds up a wax surface that will produce multiple releases and should then only require periodic application unless the area is marred when pulling the part.

Re-apply the Edge Wax to affected areas and a thin coat all over to get an even film.